020 8288 8555 (London, UK)
Delivering Worldwide
Infortrend EonStor MassCube-I A08U-C2411-M1 Desktop Cube;  8x SATA-HD;  1x SCSI-Ultra320;  1x PSU;  2x Fan;  RAID-0/1/5
Infortrend EonStor MassCube-I A08U-C2411-M1 Desktop Cube;  8x SATA-HD;  1x SCSI-Ultra320;  1x PSU;  2x Fan;  RAID-0/1/5

Stock codeSBRiEA8U4C1
Quick code5582

EonStor MassCube-I
Desktop Cube; 8x SATA-HD; 1x SCSI-Ultra320; 1x PSU; 2x Fan; RAID-0/1/5

3yr Warranty
Not available
You might be interested in
Compare both
Infortrend EonNAS 1004L NS1004L00000B-8B32 19"Rack-1U NAS;  4-Bay SATA;  2x 1GbE;  RAID-0/1/5/6
£12 OFF
Infortrend NS1004L00000B-8B32
ex.VAT £749.00 £898.80

EonNAS 1004L

Infortrend EonStor MassCube-I A08U-C2411-M1 Desktop Cube; 8x SATA-HD; 1x SCSI-Ultra320; 1x PSU; 2x Fan; RAID-0/1/5

Infortrend logo

SCSI-320 to SATA-II single controller RAID subsystem
Hardware XOR engine by dedicated ASIC chipsets
Tower or desktop stackable enclosures
Dual-speed fans to reduce noise
Enhanced modular enclosure design

Configuration Model Form Factor
Single A08U-C2411 Cube tower or desktop convertible

Multiple arrays configurable with dedicated or global hot spares
RAID levels supported: RAID 0, 1 (0+1), 3, 5, 10, 30, 50, NRAID and JBOD
Online expansion by:
Adding new drives
Copying and replacing drives with drives of larger capacity

Automatic background rebuilds
Configurable stripe size and write policy per array
Intelligent drive handling:
In degraded mode: skips irreparable blocks to continue rebuild
In normal operation: data-block verification and repair

Host Interface
One (1) SCSI-320 channel through two (2) VHDCI 68-pin SCSI ports; SCSI-160 backward compatible
Concurrent I/O commands
Tagged command queuing up to 256
Variable stripe size per logical drive
Optimization setting for random or sequential I/Os

Drive Interface
Eight (8) 3Gbps SATA-II, hot-swappable drive trays that accommodate 1-inch pitch, 3.5-inch SATA-I or SATA-II disk drives
Automatic bad-sector reassignment
Dedicated bandwidth to each connected drive

System Components
Single controller configuration provides full RAID functionalities
One (1) tower/desktop convertible enclosure
One (1) RAID controller module
One (1) 128MB SDRAM DIMM module (pre-installed on the controller module)
One (1) 250W power supply unit
Two (2), hot-swappable, redundant, single-fan cooling modules running in high/low speeds

Front LCD control panel for setup and configuration
10/100 BaseT Ethernet for out-of-band management
One (1) RS-232C serial port for local access to firmware-embedded utility
VT-100 terminal emulation via RS-232C

Telnet access via onboard Ethernet port
Java-based RAIDWatch® GUI manager:
Cross-platform, remote administration with SSL
Out-of-band access via Ethernet
Centralized management to monitor and administer multiple RAID units on one screen

Configuration Client for real-time event notification over Email, Fax, LAN broadcast, SNMP Traps, MSN messenger, ICQ, SMS short messages, and the configuration utility screen
SNMP agent support:
SNMP trap event notification with plain-text event message (no MIB file required)
SNMP V2.0 MIB file support with get-and-set commands

Onboard alarm is triggered when one of the following modules fails:
RAID controller module
Cooling module
Power supply unit
Hard drive
Violated temperature thresholds

Module status LED indicators:
Two (2) per drive tray
One (1) per cooling module
One (1) per power supply unit
Three (3) per LCD panel
Four (4) per RAID controller module
Two (2) per Ethernet port

Module failure alert through I2C bus
Intelligent Drive Handling
If two bad blocks occur on two member drives of an array, the integrity of the stored data is endangered. Media Scan, Infortrend’s innovative intelligent drive handling function, retrieves data from the damaged sectors. Media Scan handles low quality drives in both the degraded mode and during the rebuild process. For additional data security, other intelligent drive management features include the transparent resetting of hung hard drives, power-failure management, and bad-drive handling during LD expansion.
Task Scheduler
The Task Scheduler is combined with Media Scan so that the scanning operation can be scheduled beginning at a specified start time and repeating at the configurable intervals. The operation is thus hands free. Each such schedule can be defined to operate on individual hard drives, all drives of a certain class, all member drives of a specified logical drive, or all member drives of all logical drives.
Two VHDCI (2) ports in one (1) dual-stacked VHDCI SCSI connector
One (1) COM port (38400, n, 8, 1)
One (1) 10/100BaseT Ethernet port

Power Supply Module
One (1) power supply with PFC
Input: 90VAC at 8A, 260VAC at 4A with PFC (auto-switching)
47 ~ 63Hz
Output: (Maximum output: 250 Watts)
+12.0V 16A max.
+ 5.0V 20A max.
+ 3.3V 20A max.
Dimensions: 248.9D x 128.8W x 81.6H mm

Cooling Module
Two (2) redundant single-fan cooling modules
Maximum air flow (each module): High speed: 53 CFM
Low speed: 23 CFM

Environmental Specifications
Operating temperature: 0 to 40°C
Non-operating temperature: -20 to 60°C
Relative humidity: 5~95%, non-condensing
Operating altitude: 0 to 10,000 ft
0 to 40,000 ft



Stock code
EonStor MassCube-I
Desktop Cube; 8x SATA-HD; 1x SCSI-Ultra320; 1x PSU; 2x Fan; RAID-0/1/5
Date added


Form factor / drive height
Platter size
Total Drives


sub- connectionI/EQuantity
SCSISCSI 68-pin VHD (External)External1


Weight (kg)
Reviews & QuestionsPlease share your opinion or ask a question, about THIS product...

You are not logged in - we will not be able to reply directly to your message.

Question, Review or Comment

Poor Excellent

Ask a Professional!
For security reasons, please answer: How Much is 2+8 =

Alternatively, click here to contact us privately.

* Image courtesy of stockimages at FreeDigitalPhotos.net
DISCLAIMER: Product information and images on this page are for guidance only and are liable to change without notice. Some details may refer to the whole category or range, rather than this particular item. Specifications shown are our best interpretation of information supplied by the manufacturer, and are as up-to-date as possible. If you require clarification on any item, please contact us and we will be glad to help you.