Smart-UPS On-Line
APC Smart-UPS RT 15kVA RM 230V
SURT15KRMXLI

APC Smart-UPS On-Line, 12 kW / 15 kVA, Input 230V, 400V 3PH / Output 230V , Interface Port DB-9 RS-232, RJ-45 10/100 Base-T, Smart-Slot , Extended runtime model , Rack Height 12 U
Includes: CD with software, Rack Mounting support rails, Smart UPS signalling RS-232 cable, User Manual, Web/SNMP Management Card

Output
Output Power Capacity 12 kW / 15 kVA
Max Configurable Power 12 kW / 15 kVA
Nominal Output Voltage 230V
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load 94.0%
Output Voltage Distortion Less than 5%
Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages 220,240
Crest Factor 3 : 1
Waveform Type Sine wave
Output Connections
(1) Hard Wire 3-wire (H N + G)
(1) Hard Wire 5-wire (3PH + N + G)
(8) IEC 320 C19
(2) IEC Jumpers
Overload Operation 60 seconds @ 125% and 30 seconds @ 150%
Efficiency at Half Load 94%
Bypass Built-in Static Bypass,Internal Bypass (Automatic and Manual),Optional External Bypass
Input
Nominal Input Voltage 230V,400V 3PH
Input Frequency 40 - 70 Hz (auto sensing)
Input Connections
Hard Wire 3 wire (1PH+N+G)
Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations 160 - 280V
Other Input Voltages 220,240
Maximum Input Current 90A
Input Breaker Capacity 100.0 A
Input Total Harmonic Distortion Less than 5% for full load
Batteries & Runtime
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules 4
Typical recharge time 2.50 hour(s)
Replacement Battery RBC44
RBC™ Quantity 4
Nominal Battery Voltage +/-192 V (split battery referenced to neutral)
End of Discharge Battery Voltage +/-154 V
Efficiency in Battery Operation 93%
Extended Run Options APC Smart-UPS RT 15kVA RM 230V
Runtime Graph
Curve Part Number(s)
A SURT15KRMXLI
B SURT15KRMXLI
+ (1)SURT192RMXLBP2
C SURT15KRMXLI
+ (2)SURT192RMXLBP2
D SURT15KRMXLI
+ (3)SURT192RMXLBP2
E SURT15KRMXLI
+ (4)SURT192RMXLBP2

Hover over the line on the graph above to view the runtime at any desired load
Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.
View Enlarged Graph View Runtime Chart
Communications & Management
Interface Port(s) DB-9 RS-232,RJ-45 10/100 Base-T,Smart-Slot
Pre-Installed SmartSlot™ Cards AP9631
Control panel Multi-function LCD status and control console
Audible Alarm Audible and visible alarms : configurable delays
Emergency Power Off (EPO) Yes
Surge Protection and Filtering
Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
Maximum Height 533.00 mm
Maximum Width 432.00 mm
Maximum Depth 773.00 mm
Rack Height 12U
Net Weight 247.73 KG
Shipping Weight 314.09 KG
Shipping Height 990.00 mm
Shipping Width 610.00 mm
Shipping Depth 1003.00 mm
Color Black
Units per Pallet 1.00
Environmental
Operating Environment 0 - 40 °C
Operating Relative Humidity 0 - 95%
Operating Elevation 0-3000 meters
Storage Temperature -15 - 45 °C
Storage Relative Humidity 0 - 95%
Storage Elevation 0-15000 meters
Audible noise at 1 meter from surface of unit 50.00 dBA
Online Thermal Dissipation 2800.00 BTU/hr
Conformance
Regulatory Approvals EN/IEC 62040-2,EN/IEC 62040-1-1,VDE
Standard Warranty 2 years repair or replace
Environmental Compliance RoHS 7b Exemption,Contains Lithium Battery

**The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.