Hi there. Can you recommend a UPS for the DS918+ please? Thanks. Matt
Virtually any UPS can be used with almost any NAS.
The questions we would ask would be- - how many minutes/hours/days do you need to keep running in the event of a power failure? - how many other devices do you want to keep running alongside the NAS?
If you change your mind, you can return all or part of your order.
Next Day Delivery
Order before 4pm*, and in-stock products will be with you the next day. (Or Saturday. Or even Same Day).
WorldWide Deliveries
Wherever you are in the world, we can get your order to you at high speed.
SpanStor Build & Test
Our free service helps you choose the right NAS and Drives, then makes sure it is built & ready to use as soon as you get it.
Professional Live Support
We are here to assist you - before, during and after your purchase, by phone, email or live chat.
SPAN.COM Local Map:
2.9 Miles from New Malden (KT3).
3.2 Miles from Kingston Upon Thames (KT).
3.7 Miles from Esher (KT10).
5.9 Miles from Hampton (TW12).
2.8 Miles from Thames Ditton (KT7).
7.1 Miles from Richmond (TW9).
5.9 Miles from Wimbledon (SW19).
5.7 Miles from Teddington (TW11).
10.8 Miles from Earlsfield (SW18).
8.3 Miles from Mitcham (CR4).
12.7 Miles from Croydon (CR).
13 Miles from Center of London (WC).
We use cookies to give you the best experience possible. By continuing to navigate through this site you consent to the use of cookies in accordance with our Cookies Policy
APC Smart-UPS, 260 Watts / 420 VA, Input 230V / Output 230V , Interface Port DB-9 RS-232
Includes: CD with software, Smart UPS signalling RS-232 cable, User Manual
Output
Output Power Capacity 260 Watts / 420 VA
Max Configurable Power 260 Watts / 420 VA
Nominal Output Voltage 230V
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal
Output Connections
(1) IEC 320 C13
(3) IEC 320 C13
(2) IEC Jumpers
Input
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections
IEC-320 C14
Input voltage range for main operations 160 - 286V
Input voltage adjustable range for mains operation 151 - 302V
Batteries & Runtime
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 3 hour(s)
Replacement Battery RBC2
RBC™ Quantity 1
Runtime Graph
Hover over the line on the graph above to view the runtime at any desired load
Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.
View Enlarged Graph View Runtime Chart
Communications & Management
Interface Port(s) DB-9 RS-232
Control panel LED status display with On Line : On Battery : Replace Battery and Overload indicators
Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency Power Off (EPO) N/A
Surge Protection and Filtering
Surge energy rating 320 Joules
Filtering Full time multi-pole noise filtering : 0.7% IEEE surge let-through : zero clamping response time : meets UL 1449
Data Line Protection RJ-45 Modem/Fax/DSL/10-100 Base-T protection
Physical
Maximum Height 168.00 mm
Maximum Width 119.00 mm
Maximum Depth 368.00 mm
Net Weight 9.09 KG
Shipping Weight 10.23 KG
Shipping Height 318.00 mm
Shipping Width 262.00 mm
Shipping Depth 508.00 mm
Color Grey
Units per Pallet 40.00
Environmental
Operating Environment 0 - 40 °C
Operating Relative Humidity 0 - 95%
Operating Elevation 0-3000 meters
Storage Temperature -15 - 45 °C
Storage Relative Humidity 0 - 95%
Storage Elevation 0-15000 meters
Audible noise at 1 meter from surface of unit 45.00 dBA
Online Thermal Dissipation 50.00 BTU/hr
Conformance
Regulatory Approvals CE,GOST,VCCI,VDE
Standard Warranty 2 years repair or replace
Environmental Compliance RoHS 7b Exemption,China RoHS,REACH: Contains No SVHCs
**The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full load rating of the UPS.
Hi there. Can you recommend a UPS for the DS918+ please? Thanks. Matt
Virtually any UPS can be used with almost any NAS.
The questions we would ask would be- - how many minutes/hours/days do you need to keep running in the event of a power failure? - how many other devices do you want to keep running alongside the NAS?
DISCLAIMER: Product information and images on this page are for guidance only and are liable to change without notice. Some details may refer to the whole category or range, rather than this particular item. Specifications shown are our best interpretation of information supplied by the manufacturer, and are as up-to-date as possible. If you require clarification on any item, please contact us and we will be glad to help you.
☎ Buy APC Smart-UPS SC SC420I 420VA 230V, Tower (serial port only) at the best price » Same / Next Day Delivery WorldWide -- ✔ FREE Business Quotes ☎Call for pricing +44 20 8288 8555 sales@span.com ✓Free Advice --free quotes available. ☎Call for lower price +44 20 8288 8555 ✓Free Advice Included ✓Lowest Price often available