Gen 5 Fibre Channel PCIe 3.0 Quad-Port Host Bus Adapter
The LPe16000 series is powered by two XE201 converged fabric controllers and consists of an eight-lane (x8) PCIe 3.0 bus (backward compatibility to PCIe 2.0 supported). The XE201 controller is capable of Fibre Channel, and for certain adapters, Ethernet. Each of the XE201 controllers is capable of providing up to 1.2 million IOPS on a single-port, delivering the highest single-port IOPS performance in the industry.
Current ANSI/IETF Standards: FC-PI-4; FC-PI-5; FC-FS-2 with amendment 1; FC-AL-2 with amendments 1 and 2; FC-LS-2; FC-GS-6; FC-DA; FC-SP-2; FCP-4; FC-MJS; FC-SB-4; FC-SP; SPC-4; SBC-3; SSC-3; RFC4338
Legacy ANSI/IETF standards: FC-PH; FC-PH-2; FC-PH-3; FC-PI; FC-PI-2; FC-FS; FC-AL; FC-GS-2/3/4/5; FCP; FCP-2; FC-SB-2; FC-FLA; FC-HBA; FC-PLDA; FC-TAPE; FC-MI; SPC-3; SBC-2; SSC-2; RFC2625
PCIe base spec 3.0
PCIe card electromechanical spec 3.0
Fibre Channel class 2 and 3
PHP hot plug-hot swap
Quad-port 16GFC HBA
Supports 16GFC, 8GFC and 4GFC link speeds, automatically negotiated
Supports four FC ports at 16GFC max
Integrated data buffer and code space memory
Comprehensive OS & Hypervisor Support
Additional support is available from OEMs and partners
PowerPC, SPARC, x86, x64 and Intel Itanium 64-bit processor family
Data rates: 14.025 Gb/s (1600Mb/s); 8.5 Gb/s (800Mb/s); 4.25 Gb/s (400 Mb/s) (auto-detected)
Optics: Short wave lasers with LC type connector
Cable: Operating at 16Gb
15m at 16Gb on 62.5/125 μm OM1 MMF
35m at 16Gb on 50/125 μm OM2 MMF
100m at 16Gb on 50/125 μm OM3 MMF
125m at 16Gb on 50/125 μm OM4 MMF
PCI full-height, half-length form factor card
111.15mm x 167.64mm (4.376” x 6.600”)
Power & Environmental Requirements
Power supply 1.8V, 1.2V, 0.9V
Volts: +3.3, +12
Operating temperature: 0° to 55° C (32° to 131° F)
Storage temperature: -40° to 70° C (-40° to 158° F)
Relative humidity: 5% to 95% non-condensing
23° C wet bulb
Agency and Safety Approvals
Class 1 Laser Product per DHHS 21CFR (J) and EN60825-1*
UL recognized to UL 60950-1 2nd edition
cUR recognized to CSA22.2, No. 60950-1-07
TUV Bauart-certified to EN60950-1:2006 +A11+A1+A12
FCC Part 15, Class A
ICES-003:2012, Class A
EMC Directive 2004/108/EC (CE Mark)
EN55022:2010, Class A
Australian EMC Framework (C-Tick Mark)
AS/NZS CISPR:2009 +A1, Class A
VCCI Class A
BSMI Class A
MSIP (formally KCC/MIC), Class A
EU RoHS Compliant (Directive 2011/65/EU)
China RoHS Compliant
Doubling the maximum FC link rate from 8GFC to 16GFC and enhanced virtualization capabilities, help support IT “green” initiatives.
Frame-level multiplexing and out-of-order frame reassembly increases link efficiency and maximizes HBA performance.
Data Protection Features
End-to-end data protection with hardware parity, CRC, ECC and other advanced error checking and correcting algorithms ensure data is safe from corruption.
Enhanced silent data corruption protection provided by T10 PI with high-performance offload.
Deployment and Management Features
Universal boot capability allows the appropriate boot environment to be automatically selected for any given hardware.
Boot from SAN capability reduces system management costs and increases uptime.
Detailed, real-time event logging and tracing enables quick diagnosis of SAN problems.
Beaconing feature flashes the HBA LEDs, simplifying their identification within server racks.
Environmental monitoring feature helps optimize SAN availability.
The Emulex OneCommand Manager application enables centralized discovery, monitoring, reporting, and administration of adapters provided by Emulex on local and remote hosts. Powerful automation capabilities facilitate remote driver parameter, firmware and boot code upgrades.
Advanced diagnostic features, such as adapter port beaconing and adapter statistics, help optimize management and network performance, while the environmental monitoring feature helps to maintain optimum host-to-fabric connections. In addition to the GUI interface, management functions can also be performed via a scriptable Command Line Interface (CLI) as well as a web browser.
OneCommand Manager supports role-based management to facilitate administration of adapters throughout the data center without compromising security. Management privileges can be assigned based on LDAP and AD group memberships.
Emulex’s management instrumentation complies to open management standards, such as SMI-S and common HBA API support, which enables seamless upward integration into enterprise storage and server management solutions.
Part Number LPe16004-M6
4 Port 16GFC Short Wave Optical – LC SFP+ (optics included)
Emulex Certified Spare Optic Kit for LightPulse 16GFC HBAs
Compatible with all Emulex LightPulse 16GFC Host Bus Adapters
For use as an on-site spare optic
16Gb optic kit (QTY 1 optic per kit)
16GFC short wave lasers with LC-type connector SFP+ optic
What's in the box
In an effort to reduce excessive packaging, each Host Bus Adapter (HBA) ships in a small, space-efficient box. Drivers, installation manual and firmware updates are downloadable from Emulex.com.
Each box includes:
Quantity 1, full-height Host Bus Adapter
Quantity 1, full-height bracket
Quantity 1, Firmware download sheet and RoHS sheet
Three-year standard warranty, including telephone and e-mail support. Advanced exchanges available upon request.
| Stock code || SCeF16004|
| Brand || Broadcom|
| Series || LightPulse FCAL|
| Model || LPe16004-M6|
| Type || FCAL 16gbit, PCI-Express-v3.0-x8, 4-Channel, Optical|
| ROHS || Y|
| Min Qty || 5|
| Date added || 01/11/2013|
LPe16004-M6 Spec Information
| Guarantee || 3yr|
| OS Support - Windows || Windows Hyper-V, Windows Server|
| OS Support - Linux || Linux|
| OS Support - Other || Solaris, VMware vSphere|
LPe16004-M6 Spec Connections
|FCAL||FCAL Optical LC||External||4|
| Speed/RPM || Fibre Channel 16Gb/s|
Why People Choose Us?
14 Day Return Guarantee
If you change your mind, you can return all or part of your order.
Next Day Delivery
Order before 4pm*, and in-stock products will be with you the next day. (Or Saturday. Or even Same Day).
Wherever you are in the world, we can get your order to you at high speed.
SpanStor Build & Test
Our free service helps you choose the right NAS and Drives, then makes sure it is built & ready to use as soon as you get it.
Professional Live Support
We are here to assist you - before, during and after your purchase, by phone, email or live chat.