Prepare your infrastructure for tomorrow's requirements – without paying more today. SANbox 5802V offers unique phased migration to full 8Gb SAN speeds, delivering cost-effective performance and revolutionary ease of use at every stage.
Next-Generation SANs for Today’s Infrastructure
The newest addition to QLogic’s award-winning SANbox 5000 Series unleashes powerful data access possibilities for small to large enterprise customers. SANbox 5802V stackable switches offer SAN planners the best choice to cost-effectively handle current needs while preparing for known and unknown business requirements tomorrow.
8Gb / “8Gb-ready” performance at affordable prices Backwards compatible with 4Gb and 2Gb devices and optics – deploy as an 8Gb or a 4Gb switch.
“Always on” 10Gb stacking ports Why waste device ports and expensive SFPs creating ISL trunks? High-speed switch-to-switch connectivity is included with the 5802V!
20Gb ISL bandwidth option World’s Fastest Fibre Channel helps you prepare for the future without paying more today. Same cables/connectors as 10Gb!
Only QLogic offers the ability to upgrade your fabric non-disruptively as your performance needs change, allowing you to migrate to full 8Gb utilization at your own pace! More on 20Gb
Higher port density Four more ports per switch: 24 ports total. (20 device ports, plus four ultra-high-speed stacking ports)
Preferred Service included 24 x 7 call support, plus next-business-day hardware exchange
Virtual fabric-ready Dynamically provision SAN resources for greater scalability, security, reliability, and cost-savings. (All QLogic 8Gb products support the coming vFabric™ software release.)
Same Great SANbox 5000 Series Features
Cost-saving modular backbone architecture
Extended solution lifespan
4-port expansion increments
Easy to install and manage
Powerful, intuitive software
Enterprise Fabric Suite™ 2007
Still the most cost-effective SAN switch available!
SANbox 5802V provides low TCO, extended product life-span, and a phased “pay-as-you-grow” approach that will enhance any company’s long-term financial strategy. Make business-critical applications and personnel more productive with a next-generation QLogic SAN – the best choice for today’s infrastructure.
Next-Generation Stacking: A Good Idea Gets Better!
SANbox 5802V lets you connect 8Gb, 4Gb or 2Gb devices to a SAN for about the same cost as competing 4Gb-only solutions – but the investment protection advantages go much deeper than that! Unlike other solutions, the 5802V offers the ability to phase bandwidth provisioning incrementally within your inter-switch link (ISL) fabric, the most performance-critical area of the SAN.
1. Start with “Always On” 10Gb ISLs
Each SANbox 5802V ships with all four 10Gb stacking ports active by default. This unique cost-saving feature means basic inter-switch connectivity is now included with the product! Customers no longer need to take ISL port costs into account when planning and purchasing their SANs – every port they purchase may now be connected directly to a server or storage device.
10Gb ISL speed provides more than enough bandwidth for customers in the early stages of their 8Gb migration, when the majority of switch ports will still be attached to 4Gb storage and other legacy devices.
2. 20Gb Bandwidth On-Demand
When enough device ports are connected to 8Gb devices to require additional bandwidth, customers may non-disruptively upgrade their ISL ports to 20Gb – the World’s Fastest Fibre Channel. 20Gb, the only ISL technology that perfectly complements 8Gb device speeds, extends the stability, cost-savings, and performance benefits of a true backbone architecture to next-generation SANs.
IT managers now have all the network headroom they need to deploy new applications and technologies with confidence. Since 20Gb uses the same cables/connectors as 10Gb, customers can upgrade their entire SAN at the click of a mouse – without unplugging a single cable or purchasing any new hardware.
Ports per chassis
Eight to twenty 8-Gbps ports (upgradeable in 4-port increments)
Four 10/20-Gbps XPAK MSA-compliant ports (10-Gbps default; upgradable to 20-Gbps)
Multi-switch fabric support
All topologies including: stack, cascade, cascaded loop, and mesh
Multiple 10/20Gb or 8Gb links between switches
Adaptive trunking, intelligent path selection
All ports are universal, auto-discovering, selfconfiguring, and assume the following states: F_Port, FL_port, E_port, G_Port, GL_Port
Fabric Port Speed
2/4/8-Gbps, 10/20-Gbps full-duplex.All ports auto-negotiate with slower devices or ports.
Fabric latency less than 0.2 µs
Fabric Point-to-Point Bandwidth
1700 MBps full-duplex on 8-Gbps ports
5100 MBps full-duplex on 20-Gbps ports
544-Gbps per chassis, end-to-end
Maximum Frame Sizes
2148 bytes (2112 byte payload)
ASIC-embedded memory (non-shared)
Guaranteed 16 credit zero wait state buffer for full performance up to 13km @ 2-Gbps and 2km @ 10-Gbps
Extended distance via credit donation
Hot-pluggable, industry-standard 3.3 volt SFP + transceivers for 8-Gbps ports
Hot-pluggable, industry-standard XPAK optics or copper stacking cables for 10/20-Gbps ports
Compatible with 4-Gbps and 2-Gbps SFPs
Supported SFP types
Shortwave/longwave (optical), active copper
Maximum Media transmission ranges
Device ports (@ 2-Gbps)
Shortwave optical: 500 m (1,640 ft.)
Longwave optical: 10 km (6.2 mi.)
•Stacking ports (@ 10-Gbps)
Shortwave optical: 300 m (984 ft.)
Longwave optical: 2 km (1.2 mi.)
50/62.5 micron multimode fiber optic
9 micron single-mode fiber optic
Compatible with FC-SW-2 compliant switches including Brocade®, Cisco®, and McData®
Management interoperability with leading SAN management applications
QuickTools web applet
Enterprise Fabric Suite 2007
Command Line Interface
API, GS-4 Management Server (including FDMI), SNMP, RADIUS, FTP, TFTP, SMI-S.
10/100 Ethernet BaseT (RJ45), serial port (RS-232 with DB9), in-band (Fibre Channel)
Power-On Self Test (POST)
Optional SANdoctor fabric diagnostics software
Simple name server, hardware based zoning, Registered State Change Notification (RSCN), I/O StreamGuard, multi-chassis in-order delivery, automatic path selection, FDMI support, IPv6 support
LEDs, command-line console, and web utilities
Dual, hot-swap power supplies, integrated fans
Optional rail mount kit
Front-to-back air pattern
H x W x D: 43.2 x 432 x 305 mm (1.7 x 17 x 12 in) – single power supply
8.16 kg (18 lbs) – dual power supply
Environmental and Equipment Specifications
Temperature: 5° to 40°C (41° to 104°F)
Humidity: 10% to 90% non-condensing
Altitude: 0 to 10,000 feet
Vibration: 5-500 Hz, 0.27g, 5 sweeps
Shock: 3.5g, 3ms, half sine, 20 repetitions
Temperature: -20° to 70°C (-4 to 158 °F)
Humidity: 10% to 95% non-condensing
Altitude: 0 to 50,000 feet
Vibration: 2 to 200 Hz, 0.5g, 5 sweeps
Shock: 50g, 4216 mmps, 13msec, 3 axis
Voltage: 100 to 240 VAC; 50 to 60Hz
Power load: 1 A at 120 VAC; 0.5 A at 240 VAC
Heat output: 120W maximum
US/Canada: UL/cUL, 60950-1
Europe: EN60950, CB Scheme-IEC 60950-1, CE, TUV, Low Voltage Directive
Russia: GOST R
Meets Class A emissions and immunity requirements for USA, Canada, Europe, Australia, New Zealand, Korea, Japan
* Subject to availability of OS and hardware from respective OEMs.
| Stock code || SCqSB5802-08|
| Brand || QLogic|
| Series || SANbox 5802|
| Model || SB5802V-08A|
| Type || FCAL 8gbit, 8-Port Stackable Switch; 19"Rack-1U; Dual PSU|
| ROHS || Y|
| Date added || 07/03/2008|
SB5802V-08A Spec Information
| Guarantee || 1yr|
| Redundant PSU ? || |
| Rack size || 1|