IDE to SATA Hard Drive or Optical Drive Adapter - 40-Pin PATA to 2.5" SATA HDD/SSD/ODD Converter
IDE2SAT2

Overview
Connect your SATA Hard Drive or Blu-ray/DVD/CD-ROM Drive to an IDE motherboard


Features
Connect a SATA device to an IDE/ATA motherboard or controller card Complete hardware solution; no software required Support for 48-bit Logical Block Addressing (LBA) Compliant with SATA revision 1.0 specification Supports SATA I/II/III (1.5/3/6Gbps) drives Compatible with Ultra ATA 133 specification Supports 2.5", 3.5", and 5.25" SATA Drives ODD (Optical Disk Drive) support, including Blu-ray, DVD, and CD-ROM drives

Description
The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port - a cost effective solution that allows you to add newer SATA drives, and keep your existing motherboard.
The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.
The IDE/SATA adapter is backed by a StarTech.com 2-year Warranty and free lifetime technical support.


The StarTech.com Advantage
Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection Hassle-free installation, with no software CD required Backed by a StarTech.com 2 year warranty and free lifetime technical support

Applications
An internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface Ideal for use with older motherboards that do not support SATA

Specifications
Connector Type(s)IDE (40 Pin, EIDE/PATA) ''SATA Data & Power Combo (7+15 pin) ''SP4 (4 pin, Small Drive Power) Humidity15~90% RH Operating Temperature5°C to 50°C (40°F to 122°F) Storage Temperature-25°C to 80°C (-13°F to 176°F) Chipset IDMarvell - 88SA8052 Compatible Drive TypesSATA Drive Size2.5in & 3.5in InterfaceIDE Number of Drives1 Package Height33 mm [1.3 in] Package Length14.5 cm [5.7 in] Package Width17.5 cm [6.9 in] Shipping (Package) Weight89 g [3.1 oz] Maximum Data Transfer Rate133MB/sec RAIDNo MaterialSteel and Plastic Product Height2.3 cm [0.9 in] Product Length75.5 mm [3 in] Product Width20 mm [0.8 in] Weight of Product29 g [1 oz] OS CompatibilityOS independent; No software or drivers required System and Cable RequirementsAn IDE controller and ATA cable (not included). Included in PackageIDE to SATA adapter ''Instruction Manual ''LP4 Molex to SP4 Power Cable