APC Back-UPS Standby (Offline) 0.4 kVA 240 W
Stock code: BE400-GR | Quick code: 110325

APC Back-UPS Standby (Offline) 0.4 kVA 240 W

Back-UPS ES 400VA 230V German/Dutch

APC Back-UPS

£79.18 (ex. VAT) Shipping calculated at checkout

Out of stock

Custom Spanstor Build & Test

As part of our Spanstor Build & Test services, any enclosure bought with drives, we will include all firmware installations, physical drive installations, RAID/cache configurations and drive bad-sector checks, all at no additional cost. If you have any questions, please contact our friendly sales team by chat, phone or email.

Configure this product

Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery-protected and surge-only outlets Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR). Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes. Surge only outlets Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. Audible alarms Provides notification of changing utility power and UPS power conditions. LED status display Quickly understand unit and power status with visual indicators.

Power
Output frequency regulation 47 – 63 Hz
Output power 240 W
Input operation voltage (min) 180 V
Input operation voltage (max) 266 V
Surge energy rating 310 J
Maximum current 10 A
Efficiency 98.7%
Output power capacity 0.4 kVA
Ports & interfaces
Cable length 1.83 m
Number of type F outputs 8
AC outlet types Type F
Performance
Hold time (min) 6 ms
Hold time (max) 10 ms
Audible alarm modes Alarm when on battery, Low battery alarm, Overload alarm
UPS topology Standby (Offline)
Waveform Sine
LED indicators Yes
Surge protection Yes
Surge protection features Digital Subscriber Line (DSL), Fax, Modem, Network, Telephone
Noise level 45 dB
Audible alarm(s) Yes
Features
Hold time (min) 6 ms
Hold time (max) 10 ms
Audible alarm modes Alarm when on battery, Low battery alarm, Overload alarm
UPS topology Standby (Offline)
Waveform Sine
Output frequency regulation 47 – 63 Hz
Output power 240 W
Input operation voltage (min) 180 V
Input operation voltage (max) 266 V
Surge energy rating 310 J
Maximum current 10 A
Efficiency 98.7%
Surge protection Yes
Surge protection features Digital Subscriber Line (DSL), Fax, Modem, Network, Telephone
Noise level 45 dB
Audible alarm(s) Yes
Output power capacity 0.4 kVA
Input frequency 50/60 Hz
Battery
Battery life (max) 5 year(s)
Battery capacity 102 VAh
Battery voltage 12 V
Battery capacity 6 Ah
Battery technology Sealed Lead Acid (VRLA)
Battery recharge time 16 h
Typical backup time at half load 18.2 min
Typical backup time at full load 5.3 min
Automatic battery test Yes
Design
Form factor Compact
LED indicators Yes
Product colour Grey
Certification CE, GOST, NEMKO, REACH, PEP, EOLI
Cable length 1.83 m
Operational conditions
Operating temperature (T-T) 0 – 40 °C
Storage temperature (T-T) 0 – 40 °C
Operating relative humidity (H-H) 0 – 95%
Storage relative humidity (H-H) 0 – 95%
Operating altitude 0 – 15000 m
Non-operating altitude 0 – 15000 m
Technical details
Output voltage 230 V
Sustainability certificates RoHS, ENERGY STAR
Packaging data
Packaging content Wall-mounting template
Manual Yes
Package width 300 mm
Package depth 366 mm
Package height 132 mm
Package weight 5.6 kg
Weight & dimensions
Weight 5.4 kg
Width 230 mm
Height 86 mm
Depth 285 mm
Package width 300 mm
Package depth 366 mm
Package height 132 mm
Package weight 5.6 kg
Logistics data
Products per master (outer) case 2 pc(s)
Products per pallet 48 pc(s)
Certificates
Certification CE, GOST, NEMKO, REACH, PEP, EOLI
Other features
Output voltage 230 V
Packaging content Wall-mounting template
Filtering Yes
Nominal output voltage 230 V
Packaging content
Manual Yes
Packaging content Wall-mounting template

Why people choose us

  • 14 day return guarantee
  • Next day delivery
  • Worldwide shipping
  • Spanstor Build & Test
  • Professional live support

Got a question?

If you have any questions, concerns or would simply like to know more about the products we sell, please don’t hesitate to contact us by using the options below.

020 82 888 555