APC Smart-UPS Line-Interactive 1 kVA 640 W 4 AC outlet(s)
Smart-UPS, 640 Watts, 1000 VA,Input 230V, Output 230V, Interface Port DB-9 RS-232, SmartSlot, USB, Rack Height 1 U
APC Smart-UPS
Out of stock
Custom Spanstor Build & Test
As part of our Spanstor Build & Test services, any enclosure bought with drives, we will include all firmware installations, physical drive installations, RAID/cache configurations and drive bad-sector checks, all at no additional cost. If you have any questions, please contact our friendly sales team by chat, phone or email.
Boost and Trim Automatic Voltage Regulation (AVR)r
Gives higher application availability by correcting low and high voltage conditions without using the battery.r
r
Intelligent battery managementr
Maximizes battery performance, life, and reliability through intelligent, precision charging.r
r
Power conditioningr
Protects connected loads from surges, spikes, lightning, and other power disturbances.r
r
Temperature-compensated battery chargingr
Prolongs battery life by regulating the charge voltage according to battery temperature.r
r
Automatic restart of loads after UPS shutdownr
Automatically starts up the connected equipment upon the return of utility power.r
r
Automatic self-testr
Periodic battery self-test ensures early detection of a battery that needs to be replaced.r
r
Cold-start capabler
Provides temporary battery power when the utility power is out.r
r
Disconnected battery notificationr
Warns when a battery is not available to provide backup power.r
r
r
Network manageabler
Provides remote management of the UPS over the network.r
r
Audible alarmsr
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.r
r
LED status indicatorsr
Quickly understand unit and power status with visual indicators.r
r
Serial Connectivityr
Provides management of the UPS via a serial port.r
r
USB connectivityr
Provides management of the UPS via a USB port (not available on all models).r
r
Disconnected battery notificationr
Warns when a battery is not available to provide backup power.r
r
InfraStruXure Manager Compatibler
Enables centralized management via the APC InfraStruXure® Manager.r
r
r
User-replaceable batteriesr
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).r
r
Hot-swappable batteriesr
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.r
r
Predictive failure notificationr
Provides early-warning fault analysis ensuring proactive component replacement.r
r
Resettable circuit breakersr
Enables a quick recovery from overload events.r
r
r
Adjustable voltage-transfer pointsr
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.r
r
Adjustable voltage sensitivityr
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.r
r
Field-replaceable power distribution panelr
Ensures compatibility with equipment that has different plug types.
Power | |
---|---|
Output power | 640 W |
Input operation voltage (min) | 151 V |
Input operation voltage (max) | 302 V |
Surge energy rating | 480 J |
Output power capacity | 1 kVA |
Performance | |
UPS topology | Line-Interactive |
Waveform | Sine |
LED indicators | Battery replacement |
Surge protection | Yes |
Noise level | 55 dB |
Audible alarm(s) | Yes |
Features | |
UPS topology | Line-Interactive |
Waveform | Sine |
Output power | 640 W |
Input operation voltage (min) | 151 V |
Input operation voltage (max) | 302 V |
Surge energy rating | 480 J |
Surge protection | Yes |
Noise level | 55 dB |
Audible alarm(s) | Yes |
Output power capacity | 1 kVA |
Input frequency | 50/60 Hz |
Ports & interfaces | |
USB port | Yes |
Serial interface | Yes |
Serial interface type | RS-232 |
SmartSlot | Yes |
AC outlets quantity | 4 AC outlet(s) |
AC outlet types | C13 coupler |
Power plug | C14 coupler |
Number of output IEC jumpers | 2 |
Battery | |
Battery life (max) | 6 year(s) |
Battery capacity | 216 VAh |
Battery technology | Sealed Lead Acid (VRLA) |
Battery recharge time | 2 h |
Typical backup time at half load | 14.5 min |
Typical backup time at full load | 5.4 min |
Hot-swap battery | Yes |
Automatic battery test | Yes |
Design | |
Rack capacity | 1U |
Form factor | Rackmount |
LED indicators | Battery replacement |
Product colour | Black |
Certification | C-tick, CE, EN 50091-1, EN 50091-2, GOST, VDE, PEP, EOLI |
Operational conditions | |
Operating temperature (T-T) | 0 – 40 °C |
Storage temperature (T-T) | -15 – 45 °C |
Operating relative humidity (H-H) | 0 – 95% |
Storage relative humidity (H-H) | 0 – 95% |
Operating altitude | 0 – 3000 m |
Non-operating altitude | 0 – 15000 m |
Technical details | |
Sustainability certificates | RoHS |
Weight & dimensions | |
Weight | 21.8 kg |
Width | 432 mm |
Height | 44 mm |
Depth | 660 mm |
Package width | 559 mm |
Package depth | 775 mm |
Package height | 191 mm |
Package weight | 25.4 kg |
Packaging data | |
Cables included | RS-232, USB cable |
Rack mount kit | Yes |
Manual | Yes |
Software CD | Yes |
Package width | 559 mm |
Package depth | 775 mm |
Package height | 191 mm |
Package weight | 25.4 kg |
Logistics data | |
Products per pallet | 8 pc(s) |
Certificates | |
Certification | C-tick, CE, EN 50091-1, EN 50091-2, GOST, VDE, PEP, EOLI |
Other features | |
Interface | DB-9 RS-232, SmartSlot, USB |
Input connection type | IEC-320 C14 |
Nominal output voltage | 230 V |
Nominal input voltage | 230 V |
Packaging content | |
Cables included | RS-232, USB cable |
Rack mount kit | Yes |
Manual | Yes |
Software CD | Yes |
Got a question?
If you have any questions, concerns or would simply like to know more about the products we sell, please don’t hesitate to contact us by using the options below.