APC Smart-UPS Line-Interactive 3 kVA 2700 W 9 AC outlet(s)
Stock code: SMT3000R2I-6W | Quick code: 110142

APC Smart-UPS Line-Interactive 3 kVA 2700 W 9 AC outlet(s)

2U, 3000VA, 2700W, 230V, 320J, 55dBA, USB

APC Smart-UPS

£1,886.83 (ex. VAT) Shipping calculated at checkout

Out of stock

Custom Spanstor Build & Test

As part of our Spanstor Build & Test services, any enclosure bought with drives, we will include all firmware installations, physical drive installations, RAID/cache configurations and drive bad-sector checks, all at no additional cost. If you have any questions, please contact our friendly sales team by chat, phone or email.

Configure this product

StruxureWare Central compatible
Enables centralized management via StruxureWare Central.

Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Wide input voltage range
Designed for harsh electrical environments to save battery life.

LED Indicators
Provide easy-to-read status of the unit and utility power conditions.

Boost and Trim Automatic Voltage Regulation (AVR)
Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.

Serial connectivity
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC’s Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.

High online efficiency
Reduces utlility costs, generates less heat.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Energy meter
Provides actual kilowatt hours of usage for energy conscious users.

Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.

Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.

Outlet group control
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Cold-start capable
Provides temporary battery power when the utility power is out.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Network manageable
Provides remote power management of the UPS over the network.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Serial connectivity
Provides management of the UPS via a serial port.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Power
Output power 2700 W
Input operation voltage (min) 151 V
Input operation voltage (max) 302 V
Output operation voltage (min) 220 V
Output operation voltage (max) 240 V
Surge energy rating 320 J
Efficiency 98.3%
Output power capacity 3 kVA
Ports & interfaces
Cable length 2 m
USB port Yes
AC outlets quantity 9 AC outlet(s)
AC outlet types C13 coupler, C19 coupler
Power plug C20 coupler
Number of output IEC jumpers 3
Performance
Hold time (min) 4 ms
Hold time (max) 8 ms
UPS topology Line-Interactive
Waveform Sine
Auto-restart Yes
Automatic Voltage Regulation (AVR) Yes
LED indicators Status
Surge protection Yes
Noise level 55 dB
Audible alarm(s) Yes
Features
Hold time (min) 4 ms
Hold time (max) 8 ms
UPS topology Line-Interactive
Waveform Sine
Auto-restart Yes
Automatic Voltage Regulation (AVR) Yes
Output power 2700 W
Input operation voltage (min) 151 V
Input operation voltage (max) 302 V
Output operation voltage (min) 220 V
Output operation voltage (max) 240 V
Surge energy rating 320 J
Efficiency 98.3%
Surge protection Yes
Noise level 55 dB
Audible alarm(s) Yes
Output power capacity 3 kVA
Input frequency 50/60 Hz
Battery
Battery life (max) 5 year(s)
Battery capacity 547 VAh
Battery technology Sealed Lead Acid (VRLA)
Battery recharge time 3 h
Typical backup time at half load 11.5 min
Typical backup time at full load 3.2 min
Hot-swap battery Yes
Cold start Yes
Automatic battery test Yes
Design
Rack capacity 2U
Form factor Rackmount
LED indicators Status
Product colour Black
Certification C-tick, CE, EN 60950, EN/IEC 62040-1-1, EN/IEC 62040-2, GOST, GS Mark, IRAM, VDE, WEEE, REACH
Cable length 2 m
Operational conditions
Operating temperature (T-T) 0 – 40 °C
Storage temperature (T-T) -15 – 45 °C
Operating relative humidity (H-H) 0 – 95%
Storage relative humidity (H-H) 0 – 95%
Operating altitude 0 – 3000 m
Non-operating altitude 0 – 15000 m
Technical details
Sustainability certificates RoHS
Weight & dimensions
Weight 44.3 kg
Width 480 mm
Height 86 mm
Depth 683 mm
Package width 600 mm
Package depth 980 mm
Package height 254 mm
Package weight 51.7 kg
Packaging data
Quick installation guide Yes
Cables included RS-232, USB cable
Rack mount kit Yes
Software CD Yes
Package width 600 mm
Package depth 980 mm
Package height 254 mm
Package weight 51.7 kg
Logistics data
Products per pallet 8 pc(s)
Certificates
Certification C-tick, CE, EN 60950, EN/IEC 62040-1-1, EN/IEC 62040-2, GOST, GS Mark, IRAM, VDE, WEEE, REACH
Other features
Nominal output voltage 230 V
Nominal input voltage 230 V
Packaging content
Quick installation guide Yes
Cables included RS-232, USB cable
Rack mount kit Yes
Software CD Yes

Why people choose us

  • 14 day return guarantee
  • Next day delivery
  • Worldwide shipping
  • Spanstor Build & Test
  • Professional live support

Got a question?

If you have any questions, concerns or would simply like to know more about the products we sell, please don’t hesitate to contact us by using the options below.

020 82 888 555