APC Smart-UPS On-Line Double-conversion (Online) 6 kVA 6000 W 10 AC outlet(s)
Stock code: SRT6KRMXLI-6W | Quick code: 110143

APC Smart-UPS On-Line Double-conversion (Online) 6 kVA 6000 W 10 AC outlet(s)

4U, 6000VA, 6000W, 230V, 480J, 55dBA, USB, Smart-Slot

APC Smart-UPS On-Line

£4,435.87 (ex. VAT) Shipping calculated at checkout

Out of stock

Custom Spanstor Build & Test

As part of our Spanstor Build & Test services, any enclosure bought with drives, we will include all firmware installations, physical drive installations, RAID/cache configurations and drive bad-sector checks, all at no additional cost. If you have any questions, please contact our friendly sales team by chat, phone or email.

Configure this product

LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.

10/100 BaseT Connection
Connect the device to a network using a 10 or 100 BaseT connection

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Scalable runtime
Allows additional run time to be quickly added as needed.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Network manageable
Provides remote power management of the UPS over the network.

InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.

SmartSlot
Customize UPS capabilities with management cards.

LED status indicators
Quickly understand unit and power status with visual indicators.

Serial connectivity
Provides management of the UPS via a serial port.

Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Cold-start capable
Provides temporary battery power when the utility power is out.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Power
Output frequency regulation 50/60 Hz
Output power 6000 W
Input operation voltage (min) 100 V
Input operation voltage (max) 275 V
Output operation voltage (min) 220 V
Output operation voltage (max) 240 V
Surge energy rating 480 J
Efficiency 94.4%
Emergency Power Off (EPO) Yes
Crest factor 3:1
Output power capacity 6 kVA
Performance
UPS topology Double-conversion (Online)
Waveform Sine
Auto-restart Yes
Number of output phases 1
LED indicators Status
Surge protection Yes
Noise level 55 dB
Audible alarm(s) Yes
Features
UPS topology Double-conversion (Online)
Waveform Sine
Output frequency regulation 50/60 Hz
Auto-restart Yes
Number of output phases 1
Output power 6000 W
Input operation voltage (min) 100 V
Input operation voltage (max) 275 V
Output operation voltage (min) 220 V
Output operation voltage (max) 240 V
Surge energy rating 480 J
Efficiency 94.4%
Surge protection Yes
Emergency Power Off (EPO) Yes
Noise level 55 dB
Crest factor 3:1
Audible alarm(s) Yes
Output power capacity 6 kVA
Input frequency 40 – 70 Hz
Ports & interfaces
USB port Yes
Serial interface Yes
SmartSlot Yes
AC outlets quantity 10 AC outlet(s)
AC outlet types C13 coupler, C19 coupler
Power plug Terminal
Number of output IEC jumpers 2
Battery
Battery life (max) 5 year(s)
Battery capacity 902 VAh
Battery technology Sealed Lead Acid (VRLA)
Battery recharge time 1.5 h
Typical backup time at half load 8.7 min
Typical backup time at full load 2.5 min
Hot-swap battery Yes
Cold start Yes
Automatic battery test Yes
Design
International Protection (IP) code IP20
Rack capacity 4U
Form factor Rackmount
LED indicators Status
Product colour Black
Display LCD
Certification REACH, CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, VDE
Operational conditions
Operating temperature (T-T) 0 – 40 °C
Storage temperature (T-T) -15 – 45 °C
Operating relative humidity (H-H) 0 – 95%
Storage relative humidity (H-H) 0 – 95%
Operating altitude 0 – 3000 m
Non-operating altitude 0 – 15000 m
Technical details
Sustainability certificates RoHS, ENERGY STAR
Packaging data
Packaging content Web/SNMP Management Card
Quick installation guide Yes
Cables included USB cable
Rack mount kit Yes
Bracket Yes
Warranty card Yes
Temperature sensor Yes
Software CD Yes
Package width 610 mm
Package depth 960 mm
Package height 370 mm
Package weight 67 kg
Weight & dimensions
Weight 60 kg
Width 432 mm
Height 174 mm
Depth 719 mm
Package width 610 mm
Package depth 960 mm
Package height 370 mm
Package weight 67 kg
Logistics data
Products per pallet 6 pc(s)
Certificates
Certification REACH, CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, VDE
Other features
Packaging content Web/SNMP Management Card
Packaging content
Quick installation guide Yes
Cables included USB cable
Rack mount kit Yes
Bracket Yes
Warranty card Yes
Temperature sensor Yes
Software CD Yes
Packaging content Web/SNMP Management Card

Why people choose us

  • 14 day return guarantee
  • Next day delivery
  • Worldwide shipping
  • Spanstor Build & Test
  • Professional live support

Got a question?

If you have any questions, concerns or would simply like to know more about the products we sell, please don’t hesitate to contact us by using the options below.

020 82 888 555