APC Smart-UPS RT 1500VA 1.5 kVA 1050 W
Stock code: SURTA1500XL | Quick code: 110261

APC Smart-UPS RT 1500VA 1.5 kVA 1050 W

APC Smart-UPS RT 1500VA, 1.5 kVA, 1050 W, 50/60 Hz, 540 J, 45 dB, Sealed Lead Acid (VRLA)

APC Smart-UPS RT 1500VA

£1,263.93 (ex. VAT) Shipping calculated at checkout

Out of stock

Custom Spanstor Build & Test

As part of our Spanstor Build & Test services, any enclosure bought with drives, we will include all firmware installations, physical drive installations, RAID/cache configurations and drive bad-sector checks, all at no additional cost. If you have any questions, please contact our friendly sales team by chat, phone or email.

Configure this product

Includes: CD with software, Documentation CD, Installation guide, Smart UPS signalling RS-232 cable, USB cable, User Manual.r
-Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS overload condition or fault.r
-Scalable runtime: Allows additional run time to be quickly added as needed.r
-Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.r
-Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.r
-Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.r
-Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.r
-Network manageable: Provides remote management of the UPS over the network.r
-InfraStruXure Manager compatible: Enables centralized management via the APC InfraStruXure® Manager.r
-SmartSlot: Customize UPS capabilities with management cards.r
-LED status indicators: Quickly understand unit and power status with visual indicators.r
-Serial Connectivity: Provides management of the UPS via a serial port.r
-Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.r
-Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment.r
-Flash-upgradeable firmware: Easy implementation of new firmware upgrades.r
-User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).r
-Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.r
-Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.r
-Disconnected battery notification: Warns when a battery is not available to provide backup power.r
-Audible alarms: Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.r
-Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.r
-Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.r
-Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.r
-Generator compatible: Ensures clean, uninterrupted power to the loads in the event of an extended power outager
-Cold-start capable: Provides temporary battery power when the utility power is out.r
-Resettable circuit breakers: Enables a quick recovery from overload events.r
-Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.

Output power 1050 W
Surge energy rating 540 J
Emergency Power Off (EPO) Yes
Output power capacity 1.5 kVA
Ports & interfaces
Cable length 1.83 m
LED indicators Yes
Noise level 45 dB
Audible alarm(s) Yes
Output power 1050 W
Surge energy rating 540 J
Emergency Power Off (EPO) Yes
Noise level 45 dB
Audible alarm(s) Yes
Output power capacity 1.5 kVA
Input frequency 50/60 Hz
Battery technology Sealed Lead Acid (VRLA)
Battery recharge time 3 h
Typical backup time at half load 22.2 min
Typical backup time at full load 8.6 min
Hot-swap battery Yes
LED indicators Yes
Product colour Black
Certification BSMI,CSA,FCC Part 15 Class B,UL 1778
Cable length 1.83 m
Operational conditions
Operating temperature (T-T) 0 – 40 °C
Storage temperature (T-T) -20 – 50 °C
Operating relative humidity (H-H) 0 – 95%
Storage relative humidity (H-H) 0 – 95%
Operating altitude 0 – 3000 m
Non-operating altitude 0 – 15000 m
Weight & dimensions
Weight 27.5 kg
Certification BSMI,CSA,FCC Part 15 Class B,UL 1778
Other features
Output connections (6) NEMA 5-15R
Input connection type NEMA 5-15P
Dimensions (WxDxH) 85 x 559 x 432 mm
Nominal output voltage 120 V
Nominal input voltage 120 V
I/O ports DB-9 RS-232,Smart-Slot,USB

Why people choose us

  • 14 day return guarantee
  • Next day delivery
  • Worldwide shipping
  • Spanstor Build & Test
  • Professional live support

Got a question?

If you have any questions, concerns or would simply like to know more about the products we sell, please don’t hesitate to contact us by using the options below.

020 82 888 555