APC Smart UPS SC 420VA 120V 0.42 kVA 260 W
Stock code: SC420 | Quick code: 110311

APC Smart UPS SC 420VA 120V 0.42 kVA 260 W

Smart-UPS, 260 Watts, 420 VA,Input 120V, Output 120V, Interface Port DB-9 RS-232

APC Smart UPS SC 420VA 120V

£187.81 (ex. VAT) Shipping calculated at checkout

Out of stock

Custom Spanstor Build & Test

As part of our Spanstor Build & Test services, any enclosure bought with drives, we will include all firmware installations, physical drive installations, RAID/cache configurations and drive bad-sector checks, all at no additional cost. If you have any questions, please contact our friendly sales team by chat, phone or email.

Configure this product

Boost and Trim Automatic Voltage Regulation (AVR)r
Gives higher application availability by correcting low and high voltage conditions without using the battery.r
r
Intelligent battery managementr
Maximizes battery performance, life, and reliability through intelligent, precision charging.r
r
Power conditioningr
Protects connected loads from surges, spikes, lightning, and other power disturbances.r
r
Temperature-compensated battery chargingr
Prolongs battery life by regulating the charge voltage according to battery temperature.r
r
Automatic restart of loads after UPS shutdownr
Automatically starts up the connected equipment upon the return of utility power.r
r
Automatic self-testr
Periodic battery self-test ensures early detection of a battery that needs to be replaced.r
r
Cold-start capabler
Provides temporary battery power when the utility power is out.r
r
Disconnected battery notificationr
Warns when a battery is not available to provide backup power.r
r
Manageabilityr
Network manageabler
Provides remote management of the UPS over the network.r
r
Audible alarmsr
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.r
r
LED status indicatorsr
Quickly understand unit and power status with visual indicators.r
r
Serial Connectivityr
Provides management of the UPS via a serial port.r
r
USB connectivityr
Provides management of the UPS via a USB port (not available on all models).r
r
Disconnected battery notificationr
Warns when a battery is not available to provide backup power.r
r
InfraStruXure Manager Compatibler
Enables centralized management via the APC InfraStruXure® Manager.r
r
r
User-replaceable batteriesr
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).r
r
Hot-swappable batteriesr
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.r
r
Predictive failure notificationr
Provides early-warning fault analysis ensuring proactive component replacement.r
r
Resettable circuit breakersr
Enables a quick recovery from overload events.r
r
Adaptabilityr
Adjustable voltage-transfer pointsr
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.r
r
Adjustable voltage sensitivityr
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.r
r
Field-replaceable power distribution panelr
Ensures compatibility with equipment that has different plug types.r
r
Safety-agency approvedr
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.r

Power
Output power 260 W
Surge energy rating 320 J
Emergency Power Off (EPO) No
Output power capacity 0.42 kVA
Performance
Audible alarm(s) Yes
Features
Output power 260 W
Surge energy rating 320 J
Emergency Power Off (EPO) No
Audible alarm(s) Yes
Output power capacity 0.42 kVA
Ports & interfaces
Serial ports quantity 1
Number of output IEC jumpers 2
Battery
Battery technology Sealed Lead Acid (VRLA)
Typical backup time at half load 13.5 min
Typical backup time at full load 5.5 min
Technical details
Suitable for use in country/location United States
Weight & dimensions
Weight 9.09 kg
Other features
Output connections – (1) IEC 320 C13 – (3) IEC 320 C13
Input connection type IEC-320 C14
Dimensions (WxDxH) 119 x 368 x 168 mm
Nominal output voltage 120 V
Nominal input voltage 120 V
I/O ports – DB-9 – RS-232
Suitable for use in country/location United States

Why people choose us

  • 14 day return guarantee
  • Next day delivery
  • Worldwide shipping
  • Spanstor Build & Test
  • Professional live support

Got a question?

If you have any questions, concerns or would simply like to know more about the products we sell, please don’t hesitate to contact us by using the options below.

020 82 888 555