APC Smart-UPS VT 20kVA 400V 16000 W
Stock code: SUVTP20KH2B2S | Quick code: 110356

APC Smart-UPS VT 20kVA 400V 16000 W

Smart-UPS VT 20kVA 400V w/2 Batt Mod., Start-Up 5X8, Int Maint Bypass, Parallel Capable

APC Smart-UPS VT 20kVA 400V

£7,700.38 (ex. VAT) Shipping calculated at checkout

Out of stock

Custom Spanstor Build & Test

As part of our Spanstor Build & Test services, any enclosure bought with drives, we will include all firmware installations, physical drive installations, RAID/cache configurations and drive bad-sector checks, all at no additional cost. If you have any questions, please contact our friendly sales team by chat, phone or email.

Configure this product

APC Smart-UPS VT, 16 kW / 20 kVA,Input 400V 3PH / Output 230V, 400V 3PH, Interface Port DB-9 RS-232, Smart-Slot, Extended runtime model.r
r
Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network Management Card, Smart UPS signalling RS-232 cable, Start up included, User Manual.r
r
– Parallel-capacity capabler
Increases total power capacity by using multiple UPSs simultaneously.r
– Parallel-redundant capabler
Power the connected equipment with multiple UPSs to increase system redundancy.r
r
Availabilityr
– Dual mains inputr
Increases availability by allowing the UPS to be connected to two separate power sources.r
– Scalable runtimer
Allows additional run time to be quickly added as needed.r
– Hot-swappable batteriesr
Ensures clean, uninterrupted power to protected equipment while batteries are being replacedr
– Generator compatibler
Ensures clean, uninterrupted power to protected equipment when generator power is used.r
– Automatic internal bypassr
Supplies utility power to the connected loads in the event of a UPS overload condition or fault.r
– Battery modules connected in parallelr
Delivers higher availability through redundant batteries.r
r
Serviceabilityr
– User-replaceable batteriesr
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)r
– Battery replacement without toolsr
Allows quick, easy battery replacement.r
– Automatic self-testr
Periodic battery self-test ensures early detection of a battery that needs to be replaced.r
– Shippable with modules installedr
Enables pre-installation UPS staging and testing and faster installation.r
– Modular designr
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.r
r
Manageabilityr
– Network manageabler
Provides remote management of the UPS over the network.r
– InfraStruXure Manager Compatibler
Enables centralized management via the APC InfraStruXure Manager.r
– LCD displayr
Alpha-Numeric Display which displays system parameters and alarms.r
– Audible alarmsr
Provides notification of changing utility power and UPS conditions.r
– Programmable frequencyr
Ensures compatibility with different input frequencies.r
– LED status indicatorsr
Quickly understand unit and power status with visual indicators.r
– SmartSlotr
Customize UPS capabilities with management cards.r
r
Total Cost of Ownershipr
– Input power factor correctionr
Minimizes installation costs by enabling the use of smaller generators and cabling.r
– Temperature-compensated battery chargingr
Prolongs battery life by regulating the charge voltage according to battery temperature.r
– Manual maintenance bypassr
Reduces installation costs by eliminating the need for an external mechanical bypass.r
– Intelligent battery managementr
Maximizes battery performance, life, and reliability through intelligent, precision charging.r
r
Protectionr
– Frequency and voltage regulationr
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.r
– Safety-agency approvedr
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.r
– Cold-start capabler
Provides temporary battery power when the utility power is out.

Power
Output power 16000 W
Maximum current 27 A
Emergency Power Off (EPO) Yes
Output power capacity 20 kVA
Battery
Battery type VRLA
Battery technology Sealed Lead Acid (VRLA)
Battery recharge time 5 h
Replacement battery cartridge 2
Performance
Noise level 64 dB
Features
Output power 16000 W
Maximum current 27 A
Emergency Power Off (EPO) Yes
Noise level 64 dB
Output power capacity 20 kVA
Input frequency 40/70 Hz
Design
Product colour Black
Certification C-tick,CE,EN 50091-2,EN/IEC 62040-3,IEC 61000-3-2,IEC 61000-3-3,ISO 14001,ISO 9001,VFI-SS-112
Operational conditions
Operating temperature (T-T) 0 – 40 °C
Storage temperature (T-T) -15 – 45 °C
Operating relative humidity (H-H) 0 – 95%
Storage relative humidity (H-H) 0 – 95%
Operating altitude 0 – 999.9 m
Non-operating altitude 0 – 15000 m
Packaging data
Package dimensions (WxDxH) 650 x 1062 x 1643 mm
Package weight 428.2 kg
Weight & dimensions
Weight 396.8 kg
Package weight 428.2 kg
Logistics data
Products per pallet 1 pc(s)
Certificates
Certification C-tick,CE,EN 50091-2,EN/IEC 62040-3,IEC 61000-3-2,IEC 61000-3-3,ISO 14001,ISO 9001,VFI-SS-112
Other features
Battery type VRLA
Output connections 1 x Hard Wire 4-wire (3PH + G) 1 x Hard Wire 5-wire (3PH + N + G) 1 x Screw Terminals
Input connection type Hard Wire 5-wire (3PH + N + G)
Dimensions (WxDxH) 356 x 812 x 1499 mm
Package dimensions (WxDxH) 650 x 1062 x 1643 mm
Nominal input voltage 400 V

Why people choose us

  • 14 day return guarantee
  • Next day delivery
  • Worldwide shipping
  • Spanstor Build & Test
  • Professional live support

Got a question?

If you have any questions, concerns or would simply like to know more about the products we sell, please don’t hesitate to contact us by using the options below.

020 82 888 555