APC Smart-UPS VT 30 kVA 24000 W
Stock code: SUVTP30KH3B4S | Quick code: 110359

APC Smart-UPS VT 30 kVA 24000 W

Smart-UPS VT, 24 kW/30 kVA, 304 - 477V, DB-9, RS-232, Smart-Slot, 5h

APC Smart-UPS VT

£9,197.82 (ex. VAT) Shipping calculated at checkout

Out of stock

Custom Spanstor Build & Test

As part of our Spanstor Build & Test services, any enclosure bought with drives, we will include all firmware installations, physical drive installations, RAID/cache configurations and drive bad-sector checks, all at no additional cost. If you have any questions, please contact our friendly sales team by chat, phone or email.

Configure this product

Dual mains inputr
Increases availability by allowing the UPS to be connected to two separate power sources.r
r
Scalable runtimer
Allows additional run time to be quickly added as needed.r
r
Hot-swappable batteriesr
Ensures clean, uninterrupted power to protected equipment while batteries are being replacedr
r
Generator compatibler
Ensures clean, uninterrupted power to protected equipment when generator power is used.r
r
Automatic internal bypassr
Supplies utility power to the connected loads in the event of a UPS overload condition or fault.r
r
Battery modules connected in parallelr
Delivers higher availability through redundant batteries.r
r
User-replaceable batteriesr
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)r
r
Battery replacement without toolsr
Allows quick, easy battery replacement.r
r
Automatic self-testr
Periodic battery self-test ensures early detection of a battery that needs to be replaced.r
r
Shippable with modules installedr
Enables pre-installation UPS staging and testing and faster installation.r
r
Modular designr
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.r
r
Network manageabler
Provides remote management of the UPS over the network.r
r
InfraStruXure Manager Compatibler
Enables centralized management via the APC InfraStruXure® Manager.r
r
LCD displayr
Alpha-Numeric Display which displays system parameters and alarms.r
r
Audible alarmsr
Provides notification of changing utility power and UPS conditions.r
r
Programmable frequencyr
Ensures compatibility with different input frequencies.r
r
LED status indicatorsr
Quickly understand unit and power status with visual indicators.r
r
SmartSlotr
Customize UPS capabilities with management cards.r
r
Input power factor correctionr
Minimizes installation costs by enabling the use of smaller generators and cabling.r
r
Temperature-compensated battery chargingr
Prolongs battery life by regulating the charge voltage according to battery temperature.r
r
Manual maintenance bypassr
Reduces installation costs by eliminating the need for an external mechanical bypass.r
r
Intelligent battery managementr
Maximizes battery performance, life, and reliability through intelligent, precision charging.r
r
Frequency and voltage regulationr
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.r
r
Safety-agency approvedr
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.r
r
Cold-start capabler
Provides temporary battery power when the utility power is out.

Power
Output power 24000 W
Maximum current 41 A
Emergency Power Off (EPO) Yes
Output power capacity 30 kVA
Battery
Battery type VRLA
Battery recharge time 5 h
Typical backup time at half load 18.3 min
Typical backup time at full load 5.5 min
Hot-swap battery Yes
Performance
LED indicators Yes
Noise level 55 dB
Audible alarm(s) No
Features
Output power 24000 W
Maximum current 41 A
Emergency Power Off (EPO) Yes
Noise level 55 dB
Audible alarm(s) No
Output power capacity 30 kVA
Design
LED indicators Yes
Product colour Black
Operational conditions
Operating temperature (T-T) 0 – 40 °C
Storage temperature (T-T) -50 – 40 °C
Operating relative humidity (H-H) 0 – 95%
Storage relative humidity (H-H) 0 – 95%
Weight & dimensions
Weight 536.8 kg
Logistics data
Products per pallet 1 pc(s)
Other features
Interface DB-9, RS-232, Smart-Slot
Battery type VRLA
Output connections – 3PH + G; – 3PH + N + G.
Input connection type 3PH + N + G
Dimensions (WxDxH) 813 x 559 x 1499 mm
Output voltage note 380:400/415V 3
Nominal output voltage 400 V

Why people choose us

  • 14 day return guarantee
  • Next day delivery
  • Worldwide shipping
  • Spanstor Build & Test
  • Professional live support

Got a question?

If you have any questions, concerns or would simply like to know more about the products we sell, please don’t hesitate to contact us by using the options below.

020 82 888 555