APC SMT3000RMI2UC uninterruptible power supply (UPS) Line-Interactive 3 kVA 2700 W 9 AC outlet(s)
Stock code: SMT3000RMI2UC | Quick code: 110205

APC SMT3000RMI2UC uninterruptible power supply (UPS) Line-Interactive 3 kVA 2700 W 9 AC outlet(s)

2.7 kW, 3 k VA, 50/60Hz, 200 V, 6ms, RJ-45 Serial, SmartSlot, USB, 320 Joules

APC SMT3000RMI2UC

£1,659.86 (ex. VAT) Shipping calculated at checkout

Out of stock

Custom Spanstor Build & Test

As part of our Spanstor Build & Test services, any enclosure bought with drives, we will include all firmware installations, physical drive installations, RAID/cache configurations and drive bad-sector checks, all at no additional cost. If you have any questions, please contact our friendly sales team by chat, phone or email.

Configure this product

Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Cold-start capable Provides temporary battery power when the utility power is out. Disconnected battery notification Warns when a battery is not available to provide backup power. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. High online efficiency Reduces utility costs, generates less heat. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. LED Indicators Provide easy-to-read status of the unit and utility power conditions. Network manageable Provides remote power management of the UPS over the network. Outlet group control Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups). Predictive failure notification. Provides early-warning fault analysis ensuring proactive component replacement. Predictive replace battery date Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Sequenced network shutdown and reboot Customize network shutdown and reboot sequence of connected servers and UPSs. Serial connectivity Provides management of the UPS via a serial port. Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding. SmartConnect Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services. StruxureWare Data Center Expert compatible Enables centralized management via StruxureWare Data Center Expert. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. USB connectivity Provides management of the UPS via a USB port (not available on all models). User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Wide input voltage range Designed for harsh electrical environments to save battery life.

Power
Output power 2700 W
Input operation voltage (min) 151 V
Input operation voltage (max) 302 V
Output operation voltage (min) 220 V
Output operation voltage (max) 240 V
Surge energy rating 320 J
Efficiency 98.9%
Output power capacity 3 kVA
Ports & interfaces
Cable length 2 m
USB port Yes
Serial interface Yes
Serial interface type RJ-45
SmartSlot Yes
AC outlets quantity 9 AC outlet(s)
AC outlet types C13 coupler, C19 coupler
Power plug C20 coupler
Number of output IEC jumpers 3
Performance
Hold time (min) 4 ms
Hold time (max) 8 ms
UPS topology Line-Interactive
Waveform Sine
Auto-restart Yes
Automatic Voltage Regulation (AVR) Yes
LED indicators Status
Noise level 55 dB
Audible alarm(s) Yes
Features
Hold time (min) 4 ms
Hold time (max) 8 ms
UPS topology Line-Interactive
Waveform Sine
Auto-restart Yes
Automatic Voltage Regulation (AVR) Yes
Output power 2700 W
Input operation voltage (min) 151 V
Input operation voltage (max) 302 V
Output operation voltage (min) 220 V
Output operation voltage (max) 240 V
Surge energy rating 320 J
Efficiency 98.9%
Noise level 55 dB
Audible alarm(s) Yes
Output power capacity 3 kVA
Input frequency 50/60 Hz
Battery
Battery life (max) 5 year(s)
Battery capacity 547 VAh
Battery technology Sealed Lead Acid (VRLA)
Battery recharge time 3 h
Typical backup time at half load 11.5 min
Typical backup time at full load 3.2 min
Hot-swap battery Yes
Cold start Yes
Automatic battery test Yes
Design
Rack capacity 2U
Form factor Rackmount
LED indicators Status
Product colour Black
Display LCD
Certification CE, EAC, EN 60950, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEE, REACH, PEP, EOLI
Cable length 2 m
Operational conditions
Operating temperature (T-T) 0 – 40 °C
Storage temperature (T-T) -15 – 45 °C
Operating relative humidity (H-H) 0 – 95%
Storage relative humidity (H-H) 0 – 95%
Operating altitude 0 – 3000 m
Non-operating altitude 0 – 15000 m
Technical details
Sustainability certificates RoHS
Weight & dimensions
Weight 44.3 kg
Width 480 mm
Height 86 mm
Depth 683 mm
Package width 600 mm
Package depth 980 mm
Package height 254 mm
Package weight 51.7 kg
Packaging data
Quick installation guide Yes
Cables included RS-232, USB cable
Rack mount kit Yes
Software CD Yes
Package width 600 mm
Package depth 980 mm
Package height 254 mm
Bundled software Powershute Business Edition
Package weight 51.7 kg
Certificates
Certification CE, EAC, EN 60950, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEE, REACH, PEP, EOLI
Other features
Nominal output voltage 230 V
Nominal input voltage 230 V
Packaging content
Quick installation guide Yes
Cables included RS-232, USB cable
Rack mount kit Yes
Software CD Yes
Bundled software Powershute Business Edition

Why people choose us

  • 14 day return guarantee
  • Next day delivery
  • Worldwide shipping
  • Spanstor Build & Test
  • Professional live support

Got a question?

If you have any questions, concerns or would simply like to know more about the products we sell, please don’t hesitate to contact us by using the options below.

020 82 888 555