5%
off
APC SRT1500RMXLI-NC uninterruptible power supply (UPS) Double-conversion (Online) 1.5 kVA 1500 W
Stock code: SRT1500RMXLI-NC | Quick code: 110253

APC SRT1500RMXLI-NC uninterruptible power supply (UPS) Double-conversion (Online) 1.5 kVA 1500 W

1.5 kW, 1.5 kVA, 2U, 6x IEC 320 C13, 230V, 50/60Hz, 3:1, RJ-45 Serial, Smart-Slot, USB, 432 Joules

APC SRT1500RMXLI-NC

£1,491.41 (ex. VAT) Shipping calculated at checkout

3 in stock in 1-2 working days

Custom Spanstor Build & Test

As part of our Spanstor Build & Test services, any enclosure bought with drives, we will include all firmware installations, physical drive installations, RAID/cache configurations and drive bad-sector checks, all at no additional cost. If you have any questions, please contact our friendly sales team by chat, phone or email.

Configure this product

High density, double-conversion on-line power protection with scalable runtime Includes: CD with software, Comms cable, Country-specific detachable power cord, Documentation CD, Installation guide, Network Management Card, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, Temperature Probe, USB cable, Warranty card Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Scalable runtime Allows additional run time to be quickly added as needed. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. LED status indicators Quickly understand unit and power status with visual indicators. Serial connectivity Provides management of the UPS via a serial port. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. SmartSlot Customize UPS capabilities with management cards. Network manageable Provides remote power management of the UPS over the network. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Predictive failure notification. Provides early-warning fault analysis ensuring proactive component replacement. Disconnected battery notification Warns when a battery is not available to provide backup power. Audible alarms Provides notification of changing utility power and UPS power conditions Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Cold-start capable Provides temporary battery power when the utility power is out. Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Power
Output power 1500 W
Input operation voltage (min) 50 V
Input operation voltage (max) 150 V
Output operation voltage (min) 220 V
Output operation voltage (max) 240 V
Surge energy rating 432 J
Emergency Power Off (EPO) Yes
Crest factor 3:1
Output power capacity 1.5 kVA
Ports & interfaces
Cable length 1.83 m
USB port Yes
Serial interface Yes
Serial interface type RJ-45
SmartSlot Yes
Performance
UPS topology Double-conversion (Online)
Waveform Sine
LED indicators Status
Noise level 50 dB
Audible alarm(s) Yes
Features
Output frequency 50/60 Hz
UPS topology Double-conversion (Online)
Waveform Sine
Output power 1500 W
Input operation voltage (min) 50 V
Input operation voltage (max) 150 V
Output operation voltage (min) 220 V
Output operation voltage (max) 240 V
Surge energy rating 432 J
Emergency Power Off (EPO) Yes
Noise level 50 dB
Crest factor 3:1
Audible alarm(s) Yes
Output power capacity 1.5 kVA
Input frequency 40/70 Hz
Battery
Battery life (max) 5 year(s)
Battery voltage 48 V
Battery technology Sealed Lead Acid (VRLA)
Battery recharge time 3 h
Hot-swap battery Yes
Design
International Protection (IP) code IP20
Form factor Rackmount
LED indicators Status
Product colour Black
Display LCD
Certification CE, EAC
Cable length 1.83 m
Operational conditions
Operating temperature (T-T) 0 – 40 °C
Storage temperature (T-T) -20 – 50 °C
Operating relative humidity (H-H) 0 – 95%
Storage relative humidity (H-H) 0 – 95%
Technical details
Output frequency 50/60 Hz
Sustainability certificates RoHS
Weight & dimensions
Weight 21 kg
Width 432 mm
Height 85 mm
Depth 505 mm
Package width 594 mm
Package depth 749 mm
Package height 246 mm
Package weight 29.6 kg
Packaging data
Manual Yes
Package width 594 mm
Package depth 749 mm
Package height 246 mm
Package weight 29.6 kg
Logistics data
Products per pallet 12 pc(s)
Certificates
Certification CE, EAC
Packaging content
Manual Yes

Why people choose us

  • 14 day return guarantee
  • Next day delivery
  • Worldwide shipping
  • Spanstor Build & Test
  • Professional live support

Got a question?

If you have any questions, concerns or would simply like to know more about the products we sell, please don’t hesitate to contact us by using the options below.

020 82 888 555