D-Link DIS-M100G-SW network media converter 4000 Mbit/s Multi-mode, Single-mode Black
Stock code: DIS-M100G-SW | Quick code: 114868

D-Link DIS-M100G-SW network media converter 4000 Mbit/s Multi-mode, Single-mode Black

10/100/1000 Mbps to SFP Industrial Media, 4 Gbps, IEEE 802.3, Auto-MDI/MDIX

D-Link DIS-M100G-SW

£179.28 (ex. VAT) Shipping calculated at checkout

4 in stock in 1-2 working days

Custom Spanstor Build & Test

As part of our Spanstor Build & Test services, any enclosure bought with drives, we will include all firmware installations, physical drive installations, RAID/cache configurations and drive bad-sector checks, all at no additional cost. If you have any questions, please contact our friendly sales team by chat, phone or email.

Configure this product

D-Link’s Gigabit Industrial Unmanaged Media Converter turns an Ethernet connection into
fiber, allowing for ultra-fast long distance connections. The DIS-M100G-SW media converter is
housed in a highly resistant IP30-rated metal casing to protect the media converter from harsh
environmental conditions. Meanwhile, the fanless design extends the life of the DIS-M100G-SW
while also being able to operate in a wide temperature range from -40°C up to 70 °C. For
increased flexibility, the DIS-M100G-SW can also be mounted on a DIN rail or conveniently
mounted on a solid surface wall. In addition, the DIS-M100G-SW supports dual power input
which allows for a redundant power supply configuration to make sure the media converter
continues to operate in the event of a primary power supply failure.

Extend Your Network
Fiber-optic speeds are critical to success, but twisted-pair cabling can only go so far. Using
D-Link’s converters you can change a twisted-pair Ethernet connection into a single-mode or
multi-mode fiber connection that can go much further. Converters for distances of anywhere
from 550 m to 80 km allow you to optimize your selection.

No Wasted Space
Its compact size fits anywhere and doesn’t require an entire rack. Measuring just 70 mm wide by 95 mm long by 26.1 mm in depth, with the total volume of one unit just 0.174 liters. This allows for convenient installation wherever it is needed, especially in limited space environments such as telecommunication cabinets or a distribution box.

Plug and Play
The media converters offered by D-Link include several industry-standard technologies that
make them easy to operate, like 802.3u/x/ab. Auto-MDI/MDIX and Auto-Negotiation makes
sure that your cable connection functions at the highest possible speed while remaining
compatible. There’s no management software to configure – just simply connect the converter.

Network
Fiber optic connector SFP
Packet forwarding rate (100 Mbps) 2.976 pps
Auto-negotiation Yes
Converter input interface 100BASE-FX,100Base-TX,1000Base-T,1000Base-X
Networking standards IEEE 802.3ab,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z
Ethernet LAN data rates 10,100,1000 Mbit/s
Ethernet interface type Gigabit Ethernet
Duplex system Full, Half
Auto MDI/MDI-X Yes
Maximum data transfer rate 4000 Mbit/s
Technical details
International Protection (IP) code IP30
Fiber mode structure Multi-mode, Single-mode
Plug and Play Yes
Internal No
Performance
Auto-negotiation Yes
Plug and Play Yes
Fiber mode structure Multi-mode, Single-mode
Ports & interfaces
Connectivity technology Wired
Ethernet LAN (RJ-45) ports 1
Fiber ports quantity 1
Fiber optic connector SFP
DC-in jack Yes
Indication
LED indicators Link, Network
Design
International Protection (IP) code IP30
LED indicators Link, Network
Product colour Black
Certification CE, FCC
Internal No
Power
Output voltage 12 – 48 V
Power consumption (typical) 3.6 W
Management features
Plug and Play Yes
Colour
Product colour Black
Weight & dimensions
Width 70 mm
Depth 95 mm
Weight 190 g
Height 26.1 mm
Operational conditions
Operating temperature (T-T) -40 – 70 °C
Storage temperature (T-T) -40 – 85 °C
Operating relative humidity (H-H) 5 – 95%
Storage relative humidity (H-H) 5 – 95%
Certificates
Certification CE, FCC

Why people choose us

  • 14 day return guarantee
  • Next day delivery
  • Worldwide shipping
  • Spanstor Build & Test
  • Professional live support

Got a question?

If you have any questions, concerns or would simply like to know more about the products we sell, please don’t hesitate to contact us by using the options below.

020 82 888 555