QNAP TS-h886-D1622 D-1622 Ethernet LAN Tower Black NAS
Stock code: TS-H886-D1622-16G | Quick code: 101219

QNAP TS-h886-D1622 D-1622 Ethernet LAN Tower Black NAS

QNAP TS-h886-D1622

£1,647.32 (ex. VAT) Shipping calculated at checkout
Add VAT

6 in stock in 1-2 working days

Delivering enterprise performance at SMB prices, the TS-h886 features an Intel Xeon D processor and DDR4 ECC (Error Correcting Code) memory (expandable to 128 GB) with dependable reliability. With the ZFS-based QuTS hero operating system, the TS-h886 ensures data integrity and supports block-level inline data deduplication and compression, near-limitless snapshots, and real-time SnapSync. The TS-h886 helps your business achieve reliable service-level agreement performance in various use cases, including mission-critical file servers, virtualization servers, collaborative video editing, or efficient data backup and recovery applications.

Powerful Intel Xeon D processor with up to 128 GB DDR4 ECC memory
The TS-h886 uses an Intel Xeon D-1600 series processor and DDR4 ECC memory that can detect and correct single-bit memory errors as they occur to prevent downtime and data loss. Supporting up to 128 GB RAM to cope with higher workloads, the TS-h886 provides a high-performance and reliable NAS solution for demanding business IT environments.

Set SSD caching to boost IOPS with M.2 NVMe SSD
While SSD prices continue to fall, and SSD capacity and performance continue to increase, organizations can easily take advantage of SSD strengths. The TS-h886 comes with two 2.5-inch SSD drive bays and two M.2 NVMe Gen3 x4 SSD slots that allow you to flexibly configure SSD caching to increase IOPS performance and reduce storage volume latency. This is especially perfect for databases and virtual machine applications. Without occupying any 3.5-inch drive bays, the TS-h886 allows you to maximize both your storage capacity and performance.

Quad-port 2.5GbE meets today’s high-bandwidth demands
Featuring four native 2.5GbE RJ45 LAN ports (backwards compatible with 1G/100M), the TS-h886 allows you to use existing CAT5e cables to upgrade network speeds from 1 Gigabit to 2.5 Gigabit. The support of Port Trunking and failover further satisfies bandwidth and reliability demanding applications including virtualization, large file transfers, high-speed backup/restoration, and any real-time application. QNAP also offers numerous options of managed and unmanaged 10GbE/2.5GbE switches, assisting organizations in implementing high-speed, secure and scalable network environments without going over budget.

ZFS-based QuTS hero operating system enhances NAS performance and data integrity
QuTS hero combines the app-based QTS with the 128-bit ZFS file system to provide flexible storage management, comprehensive data protection, and optimized performance to tackle the complexity and performance demands of modern IT. From storage management, virtualization, to collaborative media workflows, QuTS hero streamlines your business-critical tasks.

Tiered storage configuration for a QuTS hero NAS
Follow these steps to acquire optimal storage efficiency and performance for QuTS hero.

Step 1: System Drive
The first Storage Pool you create is the system drive. Using an SSD RAID with at least two SSDs for the system drive is recommended.

Step 2: Read Cache & ZIL
Use more SSDs for read cache or ZIL. You can also install QM2 expansion cards to add M.2 SSDs for expanding cache space.

Step 3: Data Storage
Allocate HDDs/SSDs to create a RAID for storing files and application data. If needed, you can configure an all-flash configuration for optimal performance.

Inline data deduplication, compression, and compaction drives big data storage efficiency
QuTS hero supports advanced block-based data reduction technologies (including inline data deduplication, compression, and compaction) to reduce file sizes, conserve storage capacity, and optimize performance. For example, if 20 virtual machines on a NAS are replicated using the same template, then storage space requirements for all 20 virtual machines can be reduced by up to 95%. Whether acting as primary or backup storage, the TS-h886 optimizes storage utilization to provide a reliable storage cornerstone in the Big Data era.

Real-time SnapSync ensures minimal RPO with real-time disaster recovery
Real-time SnapSync ensures that both the primary and secondary NAS maintain identical data. When data is written to the source, it is immediately written to the destination. If the primary NAS goes offline, IT staff can simply adjust the privilege settings of the secondary NAS to ensure continuous operations. SnapSync provides the strongest support for nonstop business operations and helps users to reduce the risk of data loss.

All-in-one virtual machine and container hosting solution
You can count on Virtualization Station and Container Station for comprehensive virtualization support. Coupled with the Network & Virtual Switch app that boosts interoperability between virtual machines, containers, QNAP NAS, and other physical devices on the network, you can flexibly allocate physical and virtual network resources to simplify network deployment.

PCIe expansion for upgrading 10GbE transmission or enabling GPGPU computing
The TS-h886 features two PCIe Gen 3 x8 slots (each slot provides up to 64 Gb/s bandwidth) and supports installing expansion cards to enable additional functions and greater application potential.

Move business data to the cloud and enjoy low latency access to cloud-based data
The TS-h886 perfectly integrates NAS with mainstream cloud services. By deploying cloud storage gateways and enabling local caching on the TS-h886 using M.2 SSD slots (M.2 SSDs purchased separately), organizations can seamlessly use the cloud for storage, backup, and data recovery with low-latency access. This greatly helps in realizing cost-effective, flexible and secure hybrid cloud applications.

Switch operating systems to upgrade current storage
The TS-h886 can also switch to using QTS – QNAP’s standard NAS operating system. This allows you to migrate drives from your current QTS-based NAS to the more powerful TS-h886 to upgrade your storage infrastructure.

Storage
Online RAID migration Yes
Online RAID expansion Yes
Disk roaming Yes
Bad block scan Yes
Storage drives installed No
Installed drive type No
Supported storage drive types HDD & SSD
Number of storage drives supported 8
Hot-swap drive bays Yes
RAID support Yes
Supported file systems FAT32,HFS+,NTFS,ZFS,ext3,ext4
RAID levels 0,1,5,6,10,50,60
Supported storage drive interfaces Serial ATA II, Serial ATA III
Storage drive sizes supported 2.5,3.5″
Number of M.2 (M & B) slots 2
RAID rebuild Yes
Processor
Processor manufacturer Intel
Tjunction 105 °C
Thermal Design Power (TDP) 40 W
Tcase 83 °C
Scalability 1S
Processor threads 8
Processor package size 37.5 x 37.5 mm
Processor operating modes 64-bit
Processor lithography 14 nm
Processor cache 6 MB
Processor boost frequency 3.2 GHz
PCI Express slots version 2.0,3.0
On-board graphics adapter model Not available
CPU configuration (max) 1
Maximum internal memory supported by processor 128 GB
Processor ARK ID 193687
Processor frequency 2.6 GHz
Processor family Intel® Xeon® D
Processor model D-1622
Processor cores 4
Memory
Internal memory type DDR4
Internal memory 16 GB
Maximum RAM supported 128 GB
Memory slots 4
Flash memory 5000 MB
Memory form factor UDIMM
Network
Ethernet LAN Yes
Ethernet LAN data rates 10,100,1000,2500 Mbit/s
Supported network protocols TCP/IP, HTTP/HTTPS
Jumbo frames support Yes
DHCP server Yes
DHCP client Yes
WLAN adapter supported Yes
Ports & interfaces
USB port Yes
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity 3
PCI Express x8 (Gen 3.x) slots 2
Ethernet LAN (RJ-45) ports 4
Hard drive
RAID support Yes
Supported file systems FAT32,HFS+,NTFS,ZFS,ext3,ext4
RAID levels 0,1,5,6,10,50,60
Graphics
On-board graphics adapter model Not available
Design
Fan diameter 2 9.7 cm
Cooling type liquid
Fan diameter 8 cm
Built-in display Yes
Cable lock slot type Kensington
Product colour Black
Number of fans 3 fan(s)
LED indicators HDD, SSD, Status
Chassis type Tower
Cable lock slot Yes
Technical details
Type NAS
Device class Small & Medium Business
Backup function Yes
Backup features Cloud, iSCSI LUN
Built-in display Yes
Product colour Black
Noise level 20.4 dB
Multilingual support Yes
LED indicators HDD, SSD, Status
Chassis type Tower
Buzzer Yes
Number of fans 3 fan(s)
Performance
Built-in FTP server Yes
System log Yes
Share folder CIFS/SMB
S.M.A.R.T. support Yes
Hot spare Yes
Browser supported Apple Safari 7+, Google Chrome, Microsoft Internet Explorer 10+, Mozilla Firefox
Universal Plug and Play (UPnP) Yes
Type NAS
Device class Small & Medium Business
Backup function Yes
Backup features Cloud, iSCSI LUN
On/off switch Yes
Windows operating systems supported Windows 10,Windows 7,Windows 8
Server operating systems supported Windows Server 2008 R2,Windows Server 2012,Windows Server 2012 R2,Windows Server 2016,Windows Server 2019
Mac operating systems supported Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Linux operating systems supported Yes
Web-based management Yes
Security algorithms 256-bit AES,AES,FIPS 140-2,HTTPS,SSH,SSL/TLS
Reset button Yes
Operating system version 4.5.0
Noise level 20.4 dB
Multilingual support Yes
Buzzer Yes
Access Control List (ACL) Yes
Snapshot Yes
USB copy function Yes
Cooling
Cooling type liquid
Fan diameter 8 cm
Number of fans 3 fan(s)
Security
Cable lock slot type Kensington
Security algorithms 256-bit AES,AES,FIPS 140-2,HTTPS,SSH,SSL/TLS
Cable lock slot Yes
Access Control List (ACL) Yes
Software
Windows operating systems supported Windows 10,Windows 7,Windows 8
Server operating systems supported Windows Server 2008 R2,Windows Server 2012,Windows Server 2012 R2,Windows Server 2016,Windows Server 2019
Mac operating systems supported Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Linux operating systems supported Yes
Operating system version 4.5.0
Management features
On/off switch Yes
Web-based management Yes
Reset button Yes
Power
Power supply location Built-in
Power supply unit (PSU) capacity 250 W
AC input voltage 100 – 240 V
AC input frequency 50 – 60 Hz
Power consumption (typical) 75.79 W
Number of power supply units 1
Weight & dimensions
Width 292.9 mm
Depth 319.8 mm
Height 231.9 mm
Weight 8.5 kg
Package weight 10.1 kg
Packaging content
Number of screws 32
Cables included AC, LAN (RJ-45)
Processor special features
Thermal Monitoring Technologies Yes
Maximum number of PCI Express lanes 32
Intel® Turbo Boost Technology 2.0
Intel® Secure Key Yes
Intel® OS Guard Yes
Intel® Hyper Threading Technology (Intel® HT Technology) Yes
Intel® AES New Instructions (Intel® AES-NI) Yes
Intel VT-x with Extended Page Tables (EPT) Yes
Intel Virtualization Technology for Directed I/O (VT-d) Yes
Intel Virtualization Technology (VT-x) Yes
Intel TSX-NI Yes
Intel Trusted Execution Technology Yes
Intel QuickAssist Technology No
Intel 64 Yes
Idle States Yes
Execute Disable Bit Yes
Enhanced Intel SpeedStep Technology Yes
Embedded options available No
Memory types supported by processor DDR3-SDRAM,DDR4-SDRAM
System requirements
Windows operating systems supported Windows 10,Windows 7,Windows 8
Server operating systems supported Windows Server 2008 R2,Windows Server 2012,Windows Server 2012 R2,Windows Server 2016,Windows Server 2019
Mac operating systems supported Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina
Linux operating systems supported Yes
Operational conditions
Operating temperature (T-T) 0 – 35 °C
Operating relative humidity (H-H) 5 – 95%
Packaging data
Package weight 10.1 kg
Cables included AC, LAN (RJ-45)
Other features
Processor ARK ID 193687

Key features

  • Xeon D-1622 2.6 GHz
  • 16 GB DDR4
  • 5GB
  • 6x 3.5" + 2x 2.5"
  • 2x M.2
  • 4x 2.5G LAN
  • 3x USB 3.2
  • 231.9x292.9x319.8 mm

Got a question?

If you have any questions, concerns or would simply like to know more about the products we sell, please don’t hesitate to contact us by using the options below.

020 82 888 555